4× LAUNCH TSENSOR-05S RF TPMS Sensors – 315/433 MHz Programmable Sensors
The LAUNCH TSENSOR-05S 4-Piece TPMS Sensor Set is a new-generation universal replacement solution for professional tire shops, automotive workshops and technicians servicing a wide range of TPMS-equipped vehicles.
Each sensor combines 315 MHz and 433 MHz frequencies, uses the newer SENASIC SNP739D81CLE chip and supports wireless programming with compatible LAUNCH TPMS equipment.
This version includes adjustable sandblasted silver aluminum valves, providing a professional metal-valve configuration with approximately 30° of installation adjustment.
📡 315 MHz + 433 MHz Dual-Frequency
The TSENSOR-05S integrates both major conventional TPMS frequencies in one programmable sensor.
| Frequency | Programming | Workshop Benefit |
|---|---|---|
| 315 MHz | Wireless Programming | Broad Multi-Brand Coverage |
| 433 MHz | Reprogrammable | Reduced Sensor Inventory |
| Dual-Frequency | Vehicle-Specific Configuration | European, Asian & American Vehicles |
The correct vehicle configuration is assigned during programming using compatible LAUNCH TPMS equipment.
🆕 New-Generation SENASIC Chip
The TSENSOR-05S uses the SENASIC SNP739D81CLE automotive TPMS chip, designed to improve low-frequency adaptation compared with earlier LAUNCH sensor generations.
| Chip | Main Improvement | Application |
|---|---|---|
| SENASIC SNP739D81CLE | Improved LF Adaptation | Broader Vehicle Compatibility |
| Newer-Generation Platform | Faster Programming | Professional TPMS Replacement |
| Dual-Frequency Architecture | Stable RF Communication | Multi-Brand Workshop Use |
🌍 Broad OE Replacement Coverage
The TSENSOR-05S is designed as a universal programmable replacement for a very broad range of compatible OE TPMS sensors.
It can be used across many supported European, Asian and American passenger vehicles and SUVs.
Compatibility depends on the vehicle manufacturer, model, production year, market, TPMS protocol and OE sensor application.
🔄 Wireless & Reprogrammable
The sensor is programmed wirelessly through compatible LAUNCH TPMS equipment, with no direct programming cable required during normal setup.
Its reprogrammable design allows the sensor to be configured again for another supported vehicle application when required.
| Fonction | Workshop Benefit | Operation |
|---|---|---|
| Wireless Programming | Faster Sensor Preparation | No Direct Sensor Cable |
| Reprogrammable | Flexible Inventory | Multiple Supported Applications |
| Vehicle-Based Setup | Multi-Brand Use | Program Before Installation |
⚡ Faster Programming
The TSENSOR-05S is designed for improved workshop programming efficiency.
Programming time is approximately 25 seconds per sensor, compared with around 45 seconds for earlier LTR-series sensors.
With supported LAUNCH software and equipment, technicians can also program up to 4 sensors simultaneously.
4️⃣ Multi-Sensor Programming
Multi-sensor programming is especially useful when replacing all four TPMS sensors on a vehicle.
| Programming Mode | Capacity | Avantage |
|---|---|---|
| Single Sensor | 1 Sensor | Individual Replacement |
| Multi-Sensor | Up to 4 Sensors | Complete Wheel Set |
| Wireless Programming | Capteurs pris en charge | Faster Workshop Workflow |
Compatible LAUNCH software must support the multi-sensor programming function.
🧠 Multiple Sensor ID Programming Methods
Depending on the vehicle and TPMS programming tool, several ID methods can be used.
| Copy Existing ID | ECU / Manual ID | New ID |
|---|---|---|
| Read Original Sensor | Copy ID from TPMS ECU | Automatic ID Generation |
| Clone OE Sensor ID | Manual ID Entry | Program New Replacement Sensor |
| Useful When Sensor Still Works | Useful if Original Sensor Fails | Vehicle-Specific Setup |
Using the original sensor ID can simplify replacement on compatible vehicles.
🔩 Adjustable Silver Aluminum Valve
This TSENSOR-05S configuration includes a sandblasted silver aluminum valve with approximately 30° of adjustment.
The adjustable angle helps technicians position the sensor correctly inside different compatible wheel designs.
| Valve Material | Finish | Adjustment |
|---|---|---|
| Aluminum | Sandblasted Silver | Approx. 30° |
| Metal Construction | Professional Appearance | Flexible Wheel Fitment |
| Adjustable Design | Alloy-Wheel Friendly | Improved Sensor Positioning |
💨 Pressure & Temperature Monitoring
Once programmed and recognized by the vehicle, the TSENSOR-05S monitors tire pressure and temperature through the TPMS system.
| Pressure | Temperature | RF Signal |
|---|---|---|
| 0–800 kPa Range | ±5 °C Accuracy | 5–8 dBm |
| ±10 kPa Accuracy | Real-Time Monitoring | Optimized Antenna |
| Vehicle TPMS Data | Tire Condition Monitoring | Wireless Transmission |
🔋 Integrated 3.0 V Battery
Each sensor uses an integrated 3.0 V battery to power pressure measurement, temperature monitoring and RF communication.
The compact sealed design is intended for long-term automotive TPMS operation.
🌡️ Wide Automotive Temperature Range
The TSENSOR-05S is designed to withstand demanding wheel and road conditions.
| Température de fonctionnement | Température de stockage | Environnement |
|---|---|---|
| −40 °C to +125 °C | −40 °C to +125 °C | Winter & Summer Conditions |
| Automotive Wheel Use | Long-Term Storage | Heat, Vibration & Pressure |
| Wide Thermal Range | Workshop Inventory | Normal Road Operation |
📐 Compact Sensor Construction
The TSENSOR-05S uses a compact and lightweight housing designed to minimize unnecessary mass inside the wheel.
| Dimensions | Poids | Design |
|---|---|---|
| Approx. 27.2 × 20 × 76.4 mm | Approx. 24 g | Compact New-Generation Sensor |
🔧 Compatible LAUNCH TPMS Tools
The TSENSOR-05S works within the LAUNCH TPMS ecosystem.
| TPMS Tools | Diagnostic Platforms | Main Functions |
|---|---|---|
| Creader TPMS 5011 V2 | Compatible X-431 Tablets | Sensor Programming |
| CRT5011E | Supported X-431 Systems | Sensor Activation |
| X-431 i-TPMS | TSGUN-Compatible Platforms | ID Copying & Relearn |
| X-431 TSGUN | Supported LAUNCH Software | TPMS Diagnostics |
Keeping the programming tool software updated is important for newer TSENSOR-05S support.
🔄 Software Requirements
For newer TSENSOR-05S programming support, compatible tools should use the required software versions.
| Tool | Minimum Listed Version | But / Objectif |
|---|---|---|
| Creader TPMS 5011 V2 | TPMS V10.54 | TSENSOR-05S Support |
| CRT5011E | Client V1.50 | Sensor Recognition & Programming |
Future software updates may provide additional sensor and vehicle coverage.
🆚 TSENSOR-05S vs. LTR-05
| Fonction | TSENSOR-05S | LTR-05 |
|---|---|---|
| Frequency | 315 / 433 MHz | 315 / 433 MHz |
| Chip | SENASIC SNP739D81CLE | SENASIC SNP739D01CLE |
| Programming Time | Approx. 25 sec. | Approx. 45 sec. |
| Multi-Sensor Programming | Up to 4 | 1 at a time |
| Reprogrammable | Oui | Oui |
| Dual Frequency | Oui | Oui |
| Valve | Adjustable Silver Aluminum | Configuration Dependent |
| Valve Adjustment | Approx. 30° | Configuration Dependent |
The TSENSOR-05S provides faster programming, newer chip technology and improved multi-sensor workflow compared with the earlier LTR-05 generation.
🆚 TSENSOR-05S vs. TSENSOR-05N
| Fonction | TSENSOR-05S | TSENSOR-05N |
|---|---|---|
| Chip | SENASIC SNP739D81CLE | NXP NTM88H135T1 |
| Frequency | 315 / 433 MHz | 315 / 433 MHz |
| Programming Time | Approx. 25 sec. | Approx. 8 sec. |
| Multi-Sensor Programming | Up to 4 | Up to 8 |
| Reprogrammable | Oui | Oui |
| Universal Replacement | Oui | Oui |
⚙️ Spécifications techniques
| Capteur | Performance | Programming |
|---|---|---|
| TSENSOR-05S | 315 / 433 MHz | Wireless Programming |
| 4 Sensors | 0–800 kPa Pressure Range | Reprogrammable |
| SENASIC SNP739D81CLE | ±10 kPa Pressure Accuracy | OE ID Copying |
| Adjustable Aluminum Valve | ±5 °C Temperature Accuracy | Manual / Automatic ID |
| Sandblasted Silver Finish | 5–8 dBm RF Output | ECU ID Copying |
| Approx. 30° Adjustment | −40 °C to +125 °C | Approx. 25 sec./Sensor |
| Approx. 27.2 × 20 × 76.4 mm | Approx. 24 g | Up to 4 Sensors Simultaneously |
| 3.0 V Battery | Dual-Frequency Operation | Compatible LAUNCH TPMS Tools |
⚠️ Programming & Compatibility
The TSENSOR-05S is a programmable replacement sensor and must be configured for the intended vehicle using compatible LAUNCH TPMS equipment before use.
Compatibility depends on the vehicle manufacturer, model, year, market, TPMS protocol and software support. Dual-frequency capability does not automatically guarantee compatibility with every 315 MHz or 433 MHz application.
📦 Contenu de l’emballage
| Sensors | Valve Type | Quantité |
|---|---|---|
| LAUNCH TSENSOR-05S RF TPMS Sensors | Adjustable Sandblasted Silver Aluminum Valves | 4× Sensors |
| 315/433 MHz Dual-Frequency | Approx. 30° Adjustable Design | 4× Valve Assemblies |
✅ Why Choose LAUNCH TSENSOR-05S?
The LAUNCH TSENSOR-05S combines 315 MHz and 433 MHz operation, wireless programming, repeated reprogramming and a newer-generation SENASIC chip in one professional replacement sensor platform.
Compared with earlier LAUNCH LTR sensors, it offers faster programming at approximately 25 seconds per sensor and supports simultaneous programming of up to four sensors with compatible software.
The adjustable sandblasted silver aluminum valve provides approximately 30° of installation flexibility, while the compact sensor body, optimized RF antenna and wide operating temperature range make it suitable for demanding automotive TPMS applications.
For workshops already using LAUNCH Creader TPMS 5011 V2, CRT5011E, X-431 i-TPMS or X-431 TSGUN, the 4-piece TSENSOR-05S set provides a practical next-generation solution for professional TPMS sensor replacement.
